1000W Continuous pure sine wave car inverter
1. 1000W continuous pure sine wave power and 2000W surge power.
2. Ultra- clean pure sine wave power. With less than 3% total harmonic distortion.
3. The inverter is lighter and more compact than others with similar power ratings because they use high-frequency switching technology in the power conversion process.
4. Digital display shows the DC voltage, AC voltage, output power and some protection codes when inverter is in protection mode.
5. Power saving mode can be selectable.
DC12V-24V power sockets, which can power small devices such as laptops and tablets or any other household appliances, and smart USB ports (0-2.1A) are used to charge USB-powered devices. It is very suitable for products with inductive loads and is also a good choice for camping, outdoor needs or driving trips on the way. It has a cooling fan to keep the unit from over heating. adopts infinitely variable speed and temperature control settings, according to the heat generated by the work of the machine depends on the fan speed, truly mute, allowing comfortable work in a quiet environment.
Protecion Features
1. Over voltage and under voltage protection
2. Over temperature and over load protection
3. Short circuit and reverse polarity protection
| Model: |
NV-1KS-1-1 |
NV-1KS-2-1 |
NV-1KS-1-2 |
NV-1KS-2-2 |
| Continuous Power: |
1000W |
| Peak Power: |
2000W |
| DC Voltage: |
DC12V |
DC24V |
DC12V |
DC24V |
| AC Voltage: |
100VAC or 110VAC or 120VAC ± 3V |
220VAC or 230VAC or 240VAC ± 3V |
| No Load Current Draws: |
1A |
0.5A |
1A |
0.5A |
| DC Voltage Range: |
10-15.5V |
20-31V |
10-15.5V |
20-31V |
| Low Voltage Alarm: |
Lo0:10.5V |
11V±0.3V |
Lo0:21V |
22V±0.3V |
Lo0:10.5V |
11V±0.3V |
Lo0:21V |
22V±0.3V |
| Lo1:10.8V |
11.3V±0.3V |
Lo1:21.6V |
22.6V±0.3V |
Lo1:10.8V |
11.3V±0.3V |
Lo1:21.6V |
22.6V±0.3V |
| Lo2:11.3V |
11.8V±0.3V |
Lo2:22.6V |
23.6V±0.3V |
Lo2:11.3V |
11.8V±0.3V |
Lo2:22.6V |
23.6V±0.3V |
| Low Voltage Shut Down: |
Lo0:10.5V |
10.5V±0.3V |
Lo0:21V |
21V±0.3V |
Lo0:10.5V |
10.5V±0.3V |
Lo0:21V |
21V±0.3V |
| Lo1:10.8V |
10.8V±0.3V |
Lo1:21.6V |
21.6V±0.3V |
Lo1:10.8V |
10.8V±0.3V |
Lo1:21.6V |
21.6V±0.3V |
| Lo2:11.3V |
11.3V±0.3V |
Lo2:22.6V |
22.6V±0.3V |
Lo2:11.3V |
11.3V±0.3V |
Lo2:22.6V |
22.6V±0.3V |
| Low Voltage Alarm Recovery: |
Lo0:10.5V |
11.3V±0.3V |
Lo0:21V |
22.6V±0.3V |
Lo0:10.5V |
11.3V±0.3V |
Lo0:21V |
22.6V±0.3V |
| Lo1:10.8V |
11.6V±0.3V |
Lo1:21.6V |
23.2V±0.3V |
Lo1:10.8V |
11.6V±0.3V |
Lo1:21.6V |
23.2V±0.3V |
| Lo2:11.3V |
12.1V±0.3V |
Lo2:22.6V |
24.2V±0.3V |
Lo2:11.3V |
12.1V±0.3V |
Lo2:22.6V |
24.2V±0.3V |
| Low Voltage Protection Recovery: |
Lo0:10.5V |
12V±0.3V |
Lo0:21V |
24V±0.3V |
Lo0:10.5V |
12V±0.3V |
Lo0:21V |
24V±0.3V |
| Lo1:10.8V |
12.3V±0.3V |
Lo1:21.6V |
24.6V±0.3V |
Lo1:10.8V |
12.3V±0.3V |
Lo1:21.6V |
24.6V±0.3V |
| Lo2:11.3V |
12.8V±0.3V |
Lo2:22.6V |
25.6V±0.3V |
Lo2:11.3V |
12.8V±0.3V |
Lo2:22.6V |
25.6V±0.3V |
| Over Voltage Shut Down: |
15.7V±0.3V |
31.5V±0.3V |
15.7V±0.3V |
31.5V±0.3V |
| Over Voltage Recovery: |
15.3V±0.3V |
30.6V±0.3V |
15.3V±0.3V |
30.6V±0.3V |
| Frequency: |
50HZ ± 0.5HZ or 60HZ ± 0.5HZ |
| Output Waveform: |
Pure Sine Wave |
| AC Regulation: |
THD<3% (Linear load) |
| Output Efficiency: |
Up to 91% |
| Remote Control (Optional): |
Cable length: 15m is available. |
| Power-Saving mode: |
The power saving mode will be activated when the output power is less than 5W. When output power is more than 10W, the inverter will automatically return to normal status. |
| Ignition Function: |
Connect vehicles battery (or connect positive pole of vehicles' STARTER). The inverters start simultaneously When the vehicles start; The inverters will shut down meantime when the vehicles shut down. |
| Protection Function: |
Low voltage alarm |
code: F05 |
Buzzer sounds and fault light turns red |
| Low voltage shutdown |
code: F01 |
Recover by hand after the inverter shutdown. (the inverter will auto recover when the battery voltage go back to a normal level within 20ms.) |
| Over input voltage protection |
code: F02 |
Recover by hand after the inverter shutdown. (the inverter will auto recover when the battery voltage go back to a normal level within 20ms.) |
| Over load alarm |
code: F06 |
Buzzer sounds and fault light turns red when output power is overloaded around 110%. But the BUZZ and F06 code will not occured when the output power drop to a normal level within 20ms. |
| Over load protection |
code: F03 |
The inverter shutdown when output power is overloaded around 120%, it need to be recovered by hand. |
| Over temperature alarm |
code: F07 |
Buzzer sounds and fault light turns red when the inverter's internal temperature is higher than the limit value (90±5ºC). |
| Over temperature protection |
code: F04 |
The inverter will automatically return to normal status when the internal temperature drops to 80±5ºC. |
| Short circuit protection |
code: F03 |
Recover by hand |
| Reverse polarity protection |
|
Built-in fuse |
| AC input overload protection |
code: F09 |
The fan will start to work when the relay temperature is up to 60±5ºC; but it will stop to work when the relay temperature drops to 50±5ºC. The unit will alarm, and no AC output when relay temperature is up to 75±5ºC; But it will auto recover when the relay temperature drops to normal value. |
| Fuse: |
Internal |
USB port |
5V, 2.1A |
| Working Temperature: |
-10°C--+50°C |
Production Size |
330×150×78mm |
| Storage Temperature: |
-30°C--+70°C |
Packing Size |
40.5×22×13.5cm |
| Warranty: |
18 months |
N.W. / G.W. (KG) |
2.6KG/3.2KG |
| Start: |
Bipolar soft-start |
Quantity / Carton |
6pcs |
| Cooling Way: |
Intelligent cooling fan |
Carton Size |
45×42×43cm |
| Certification: |
CE, E-mark, FCC, ROHS |
Carton Weight |
20.0KG |
Audited Supplier 
){kind=link}
){kind=link}